BMW 3-Series Ground Clearance

Ground clearance (also acknowledged as Ride height) defines the area between the minimum mark of the auto’s underbody and the gap of the tires’ touch with the even area. Nevertheless, the maker of the model might utilize some tricks to the typical process to promote attractive estimation hinting the real length from the shock absorbers, the engine oil pan or the muffler to the ground could be reduced than mentioned in the printed leaflet.

It is no wonder as long as efficient people hunt for an elevated ground clearance to rule out dilemma when parking near the barriers or riding through the choppy landscape. The explicit ride height of the model deviates from 120 to 145 mm based on the year of production and trim. Bear in mind that a heavy- loaded transport will easily sacrifice about 1 inch of ground clearance.

Luckily, the model ground clearance can be lifted via spacers for shock absorbers to help the vehicle sit higher off the ground. While relishing a higher model, you sacrifice a bit of the erstwhile stability and maneuverability at high speeds. Instead model ground clearance can be diminished in favor enhanced handling and stability.

There a number of ways to increase ground clearance. When it comes to lifting or lowering your BMW 3-Series you can choose between bigger tires, a leveling kit, coil spring assisters, coilovers, airlift suspension, suspension lifts, etc.

05.2015 – 01.2019

Trims Ground Clearance, mm
320i xDrive AT 145
330e AT iPerformance 145
320i AT 145
328d AT 145
330i xDrive AT 145
330i AT 145
340i xDrive AT 145
340i AT 145

How to raise Ground Clearance on your BMW 3-Series. Tip 1 – Get Bigger Tires.

You can raise the ground clearance of your BMW 3-Series by upgrading tires to the bigger size. This will earn you extra 0,5-1 inch of clearance.


How to lower the Ground Clearance on your BMW 3-Series.

Option 1 – Install Lowering Springs .

Option 2 – Install Coilovers

Option 3 – Install Air Suspension Kit


Share

Leave a Reply

Your email address will not be published. Required fields are marked *